1-Day Workshops

Glass Cutting Workshop

Class Cost: $157.50 tax included
Date: Sunday, 12:00 pm to 4:00 pm

Prerequisites: None
Tools & supplies needed: Safety glasses and/or gloves if you feel you need them.

This is a wonderful and very necessary workshop to get you started into the world of glass, whether it be stained glass, mosaics or fusing. You will learn and practice all of the techniques to achieve various shapes – freehand, straight edge cutting, inside curves, and circles, just to name a few. The layouts for cutting and for saving time and money will be shown. Glass cutters are explained, with different types for you to try before you buy. Mosaic glass cutters, strip cutters, circle cutters, and running pliers will available for you to learn and try as well. Students will learn “English cutting”, template cutting, and a graphic demo on cutting background from one piece of glass. The proper use of groziers/breakers and the “chewing” technique will be taught, as well as the techniques for using a carborundum stone, and glass grinders. Safety, the different kinds of glass, and specialty machines/tools will be discussed. It is highly recommended that the student purchase 2 sq. ft. or more of clear gluechip glass as soon as to practice and to reinforce techniques learned and increase confidence. Your world will expand into a whole new art form!

Master Pattern & Template Workshop

Class Cost: $115.00 tax included
Date: Sunday, 12:00 pm to 3:00 pm
Want more time? Add extra classes as a drop-in: 2 1/2 hours – $52.50 incl. tax, per class.

Prerequisites: None
Tools & supplies needed: None

This class is so important! A great master pattern is the start of a great glass project! A poor pattern causes many problems & frustrations or worse, you feel like you can not do glass work. We will teach you how to correct a lamp panel design, add all reference info, make templates to cut from, and verify the fit before you start. We teach you about the importance & the power of the flow of glass so it too can be incorporated into the master. This information will also work for flat projects; however in this class we have chosen a 3D pattern because you will learn more. Lead working and mosaic patterns will be covered as well. This course will save you time, money, fitting & grinding and your confidence.

Glass Foiling Workshop

Class Cost: $168.00 tax included (some supplies included.)
Date: Sunday, 12:00 pm to 3:00 pm

Prerequisites: Some knowledge of stained glass techniques
Tools & supplies needed: Glass cut and ground in the following approx. sizes & shapes:

  • 1 each – 3″ circle, 2″x2″ bevel
  • 2 each – 3″x3″ squares with a deep inside curve cut out, 2″x3″ rectangles, long skinny points & 2″x2″ squares
  • 3 each – 1 1/2″ x 10″ strips
  • 7/32 copper foil, burnisher, razor blade, & clean tea towel
  • Magnifying or reading glasses if required

Lots of info and a “great hands on” course! The student will learn regular foiling, with tips and tricks including dealing with splits on inside curves, long tapered points, foiling thick to thin glass, strong wider foil borders, custom cutting foil for jewels & making “fake” corners. You will also do foil overlays with sheet foil onto glass. Discussion on sizes, types of foil, & how and when to use them is really informative! Foiling machines, tools and accessories will also be discussed and available to try. We will supply the unusual sizes of foil needed. As solder follows foil so perfectly, this class will help the student achieve better results in foiling which will reflect on the soldering results for strength, aesthetics & longevity. Less frustration too! Please do not bring a project!

Soldering Workshop

Class Cost: $126.00 tax included (Solder supplied.)
Date: Sunday, 12:00 pm to 3:00 pm

Prerequisites: Beginner window and/or lamp course, weekend foil workshop
Tools & supplies needed: Glass cut and foiled in 7/32 foil in the following approx. sizes

  • 8 strips of glass 1½”x 10”
  • 8 strips of glass 1½” x 5”
  • Soldering iron, iron control (if you have), sponge, brush, flux, 50/50  solder & a 3” or 4” vase cap if you want to tin

The main focus of this course is to learn to get a consistently smooth bead with both 50/50 and 60/40 solders, and learning the different techniques for both. We will go over your equipment & supplies to see if they are causing you problems, as poor quality solder and some fluxes do not perform well. We will show and/or discuss: how to properly tin metal, foil overlays, decorative soldering, beading edges, 3D seams and joins, small solder castings, inserting glass beads, solder claws, little artsy additions with sheet foil, wire work & using filigree overlays. We play with solder sculpturing – Way fun! It is very important that the student goes home and practices as soon as, so the techniques learned are reinforced. Please do not bring a project – we need to play too much!

Stained Glass & Bevel Box Workshop

Class Cost: $246.75 tax included
Date: Sunday, 12:00 pm to 6:00 pm

Prerequisites: Beginner Copper Foil Window or Beginner Lamp
Tools & supplies needed:

  • 1 sq ft art glass of your choice
  • All tools, 7/32 foil, 50/50 solder, flux
  • small box with some balled up newspaper

IMPORTANT! Get your pattern & bevels one week or more prior to class to have prep work done!

Another often requested class! You can read how to make a box, but it doesn’t always make sense until you see it & on top of that, some of the books show the wrong way to construct a box aesthetically & strength wise! This workshop walks you through making one from scratch. The addition of bevels for the sides saves time and looks great. We teach you how to determine the size of the lid for different looks and styles. The principles of 3D construction are also learned and are applicable for all 3D construction. We have a trick for the hinge that is worth the course if only in terms of frustration! Using a hinge isn’t just for boxes and is very useful info to have under your belt. We will add feet, attach chain to hold lid when open and show decorative ideas for the lid. The design possibilities are endless.

Designing with Bevels Workshop

Class Cost: $210.00 tax included
Date: Sunday, 12:00 pm to 4:00 pm

Prerequisites: Any of the stained glass courses or weekend workshops
Note: Drafting Tools supplied

Tools & supplies needed:

  • Bevel cluster of your choice &  large enough piece of graph paper
  • masking tape, marker
  • Ceiling tile, aluminum pins & paper or clean towel

IMPORTANT! Get your pattern & bevels one week or more prior to class to have prep work done!

Often requested, I am finally holding this basic design course! Bevel clusters are beautiful but can be incredibly frustrating. They can be used in copper foiled or leaded windows or even in lamps. I will walk you through fitting them, designing with them, and adding a straight line bevel border with different options and/or special corner bevels, or jewels for effect.
The size of the finished design will reflect the size of the cluster, so there won’t be a large background area. With your input, I will help you design a basic background to accommodate your cluster to understand the principles of what will or won’t work; but not a whole scene! In the advanced course you will get the use of my artistic hand a lot more!
A freeform design can also be considered with added reinforcement or glass additions for strength. This info is also great for other projects! Medium & medium large clusters that are not an “animal” will work best for this workshop. The small ones won’t be enough to design with. Advice on the selection of glass for the background will be done with each student and the group.
If drawing is one of your most favorite parts of the stained glass process, consider the advanced course. We will play with unusual concepts & go outside the box!​

Etching Workshop

Class Cost: $141.75 tax included (Supplies & tools included.)
Date: Sunday, 12:00 pm to 3:00 pm

Prerequisites: None
Note: Drafting Tools supplied

Tools & supplies needed: Magnifier or reading glasses if required

As with most of the workshops and courses offered, good eyesight or good glasses are essential to this course. Two methods of design cutting will be taught, one for clear glass & one for mirror. Cutting the resist to pattern, removing pieces and deciding positive or negative areas will be covered as well as applying the etching crème, removing, reusing, and double application. We will play with freehand designing applications too. Many tricks and tips included. For those who are interested, the basics for sandblasting, & the different resists that are used will be explained as well. Purchased precut designs and rub on photo resist designs will be explained, along with 3D applications & tips. When you have etched a window on the outside and it rains, interesting effects are created as it dries! Did you know some acid etch can help hide a broken seal in a thermal window? Or help give some privacy? Beware though, it is permanent! A fun and informative course.

“Finish Or Repair It” Workshop

Class Cost: $147.00 tax included
Date: Sunday, 12:00 pm to 4:00-ish pm

Prerequisites: The applicable course for the project in progress
Tools & supplies needed: Your unfinished or damaged art work, and the tools and supplies required to complete the task.

This is a good one for those of you who haven’t the time for a weekly class, but still would like help &/or encouragement to finish glass work already in progress or to fix a broken piece. If you have never replaced a broken piece, it is a little daunting the first time around. Sometimes one needs a little push to get over the hump! Maybe you need a mini refresher on technique to finish? Maybe you are stuck on what to do next? Maybe you just need reassurance that you are on the right track? Projects could include stained glass windows, lamps, boxes, mosaic work, cutting resist for an etching, or? Projects will vary I am sure!
If the two hours isn’t enough time to accomplish what you want done & you feel you need more help, you have the option to extend the course for another hour or so for an additional fee.

Proper Care & Maintenance of Tools

Class Cost: $55.00 tax included
Date: Sunday, 12:00 pm to 1:30-ish pm

Prerequisites: None
Tools & supplies needed: glass cutter, grosiers, straight edge, lead knives & dykes, glass grinder, soldering iron, sponge, flux brush, medium steel wool, small wire brush, flux, WD-40, & anti-seize

You have the tools and machines, but you want to get the best value for your money. This mini course is for you! Hands on demos on deburring grinder shaft, lubricating & anti-seize applications & cleaning bitsert on tabletop of grinder, as well as best use of a diamond bit. Soldering tip – plated or not plated? Re-tinning an iron tip & cleaning shaft for ease of removing & for longer life. How to cleaning grosiers& lead dykes, checking straight edge, glass cutter & lead knives for problems. We go over best ways to store equipment, and preventive measures. I will check all tools as well to see if they are performing okay, as they may be the cause of some frustration.